SHOP BY CATEGORY

PAYMENTS







Home > Shocks > SWAY-AWAY
Choose a category:
AIRSHOCKS BUMP STOPS
BYPASS COILOVERS
GM/CHEVY
Sort By:
Page of 2
Rubber isolators for shock reservoir or fluid container
Rubber isolators for shock reservoir or fluid container
Our Price: $2.95

Urethane isolators for shock reservoir or fluid container.
Price is each.

MRP100

Supplied by Latest Rage
more info
SWAY-A-WAY 2.0 Hydraulic Bump Stops
SWAY-A-WAY 2.0 Hydraulic Bump Stops
Our Price: $295.00

2.0” hydraulic bump stops greatly improve handling and help to eliminate suspension damage due to bottoming out. Bump Stops come standard in 2”, 4” travel, come with a 1 3/8” diameter tubular shaft, and incorporate a tough nylon end piece to soften the blow when contacted by the suspension. Bump stops are adjustable internally (valving) and externally (nitrogen pressure) and come standard with smooth bright silver cadmium plated cylinders and red anodized aluminum parts.

Shock Travel Extended Length Compressed Length Part Number
2" 10.57" 8.36" 52600-0402
4" 14.51" 10.30" 52600-0404

Please select stroke length
Price is for one bump stop


more info
SWAY-A-WAY 2.5 Hydraulic Bump Stops
SWAY-A-WAY 2.5 Hydraulic Bump Stops
Our Price: $395.00


Shock Travel Extended Length Compressed Length

56600-0402 Bump Stop 2.5 x 2
56600-0404 Bump Stop 2.5 x 4

Price is for one bump stop
Please select stroke length


more info
SWAY-A-WAY 2.0" Emulsion Shock
SWAY-A-WAY 2.0" Emulsion Shock
Our Price: $445.00

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!

2.0" Shocks
Sway-A-Way 2.0” Shocks are designed for applications including off-road buggies, long travel sand cars, extreme rock crawlers, trucks, pre runners and performance street vehicles. These rebuild able and re valve able shocks are available in remote reservoir, piggyback, emulsion, air shock and bypass designs.
Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in right and left hand designs. Shock travel ranges from 6” to 18” in 2” increments. All 2.0” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.0 air shocks come with a tubular 1 3/8” Nitro Steel shafts. All shock cylinders except the air, and bypass shocks are threaded for both single & dual rate applications, and use standard 2.5” I.D. coil springs.
Coil over kits can be added for coil spring applications. Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts.

Part # Travel (in) Extended Length (in) Collapsed Length (in) Shaft (in) Cylinder Type

52000-0408 8" 22.9" 14.37" 7/8" Threaded
52000-0410 10" 26.9" 16.37" 7/8" Threaded
52000-0412 12" 31.57" 19.05" 7/8" Threaded
52000-0414 14" 35.57" 21.05" 7/8" Threaded
52000-0416 16" 40.57" 24.05" 7/8" Threaded



Select length

more info
SWAY-A-WAY 2.5" Threaded Body Emulsion Shock
SWAY-A-WAY 2.5" Threaded Body Emulsion Shock
Our Price: $545.00

SAW 2.5" Threaded Body Emulsion Shock
Sway-A-Way 2.5” Shocks are designed for applications including off-road buggies, long travel sand cars, trucks, pre runners, extreme rock crawlers, and performance street vehicles. These shocks can be rebuilt and re valved by the owner, and are available in remote reservoir, top mount piggyback, bottom mount piggy back, emulsion, air shock and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in left and right hand designs. Shock travel ranges from 8” to 18” in 2” increments.

All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.

Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.


Part # Travel (in) Extended Length (in) Collapsed Length (in) Shaft (in) Cylinder Type

56000-0408 Coilover 2.5x8 Emulsion w/ Coilover Hardware
56000-0410 Coilover 2.5x10 Emulsion w/ Coilover Hardware
56000-0412 Coilover 2.5x12 Emulsion w/ Coilover Hardware
56000-0414 Coilover 2.5x14 Emulsion w/ Coilover Hardware
56000-0416 Coilover 2.5x16 Emulsion w/ Coilover Hardware
56000-0418 Coilover 2.5x18 Emulsion w/ Coilover Hardware

Please select stroke length

Price is for one shock


more info
SWAY-A-WAY 2.0" remote reservoir Shock
SWAY-A-WAY 2.0" remote reservoir Shock
Our Price: $545.00

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!

2.0" Shocks
Sway-A-Way 2.0” Shocks are designed for applications including off-road buggies, long travel sand cars, extreme rock crawlers, trucks, pre runners and performance street vehicles. These rebuild able and re valve able shocks are available in remote reservoir, piggyback, emulsion, air shock and bypass designs.
Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in right and left hand designs. Shock travel ranges from 6” to 18” in 2” increments. All 2.0” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.0 air shocks come with a tubular 1 3/8” Nitro Steel shafts. All shock cylinders except the air, and bypass shocks are threaded for both single & dual rate applications, and use standard 2.5” I.D. coil springs.
Coil over kits can be added for coil spring applications. Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts.


Part # Travel (in) Extended Length (in) Collapsed Length (in) Shaft (in) Cylinder Type

52000-0108 8" 22.9" 14.37" 7/8" Threaded

52000-0110 10" 26.9" 16.37" 7/8" Threaded
52000-0112 12" 31.57" 19.05" 7/8" Threaded
52000-0114 14" 35.57" 21.05" 7/8" Threaded
52000-0116 16" 40.57" 24.05" 7/8" Threaded
52000-0118 18" 44.57" 26.05" 7/8" Threaded

Select length

more info
SWAY-A-WAY 2.5" Threaded Body Remote Reservoir Shock
SWAY-A-WAY 2.5" Threaded Body Remote Reservoir Shock
Our Price: $645.00

Sway-A-Way 2.5” Shocks are designed for applications including off-road buggies, long travel sand cars, trucks, pre runners, extreme rock crawlers, and performance street vehicles. These shocks can be rebuilt and re valved by the owner, and are available in remote reservoir, top mount piggyback, bottom mount piggy back, emulsion, air shock and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Shock travel ranges from 8” to 18” in 2” increments.

All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.

Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.

2.5" Remote Reservoir

Part # Travel (in) ExtendedLength (in) CollapsedLength (in) Shaft (in) Cylinder Type

56000-0108 Coilover 2.5x8 Remote Reservoir w/ Coilover Hardware
56000-0110 Coilover 2.5x10 Remote Reservoir w/ Coilover Hardware
56000-0112 Coilover 2.5x12 Remote Reservoir w/ Coilover Hardware
56000-0114 Coilover 2.5x14 Remote Reservoir w/ Coilover Hardware
56000-0116 Coilover 2.5x16 Remote Reservoir w/ Coilover Hardware
56000-0118 Coilover 2.5x18 Remote Reservoir w/ Coilover Hardware

more info
SWAY-A-WAY 2.0" Double Bypass Shock
SWAY-A-WAY 2.0" Double Bypass Shock
Our Price: $749.95

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!


2.0" Shocks
Sway-A-Way 2.0” Shocks are designed for applications including off-road buggies, long travel sand cars, extreme rock crawlers, trucks, pre runners and performance street vehicles. These rebuild able and re valve able shocks are available in remote reservoir, piggyback, emulsion, air shock and bypass designs.
Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in right and left hand designs. Shock travel ranges from 6” to 18” in 2” increments. All 2.0” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.0 air shocks come with a tubular 1 3/8” Nitro Steel shafts. All shock cylinders except the air, and bypass shocks are threaded for both single & dual rate applications, and use standard 2.5” I.D. coil springs.
Coil over kits can be added for coil spring applications. Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts.

Part # Travel (in) Tubes Side Extended
Length (in) Collapsed
Length (in) Shaft (in) Cylinder
Type
SAW-52000-208-2L 8" 2 Tubes Left 22.9" 14.37" 7/8" Threaded
SAW-52000-210-2L 10" 2 Tubes Left 26.9" 16.37" 7/8" Threaded
SAW-52000-212-2L 12" 2 Tubes Left 31.57" 19.05" 7/8" Threaded
SAW-52000-214-2L 14" 2 Tubes Left 35.57" 21.05" 7/8" Threaded
SAW-52000-216-2L 16" 2 Tubes Left 40.57" 24.05" 7/8" Threaded
SAW-52000-208-2R 8" 2 Tubes Right 22.9" 14.37" 7/8" Threaded
SAW-52000-210-2R 10" 2 Tubes Right 26.9" 16.37" 7/8" Threaded
SAW-52000-212-2R 12" 2 Tubes Right 31.57" 19.05" 7/8" Threaded
SAW-52000-214-2R 14" 2 Tubes Right 35.57" 21.05" 7/8" Threaded
SAW-52000-216-2R 16" 2 Tubes Right 40.57" 24.05" 7/8" Threaded

Select length,reservoir style, and side before check out.

more info
SWAY-A-WAY 2.0"  Triple Bypass Shock
SWAY-A-WAY 2.0" Triple Bypass Shock
Our Price: $779.95

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!
Discounted 10% off of MSRP

2.0" Shocks
Sway-A-Way 2.0” Shocks are designed for applications including off-road buggies, long travel sand cars, extreme rock crawlers, trucks, pre runners and performance street vehicles. These rebuild able and re valve able shocks are available in remote reservoir, piggyback, emulsion, air shock and bypass designs.
Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in right and left hand designs. Shock travel ranges from 6” to 18” in 2” increments. All 2.0” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.0 air shocks come with a tubular 1 3/8” Nitro Steel shafts. All shock cylinders except the air, and bypass shocks are threaded for both single & dual rate applications, and use standard 2.5” I.D. coil springs.
Coil over kits can be added for coil spring applications. Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts.

Part # Travel (in) Tubes Side ExtendedLength (in) CollapsedLength (in) Shaft (in) CylinderType
SAW-52000-208-3L 8" 3 Tubes Left 22.9" 14.37" 7/8" Threaded
SAW-52000-210-3L 10" 3 Tubes Left 26.9" 16.37" 7/8" Threaded
SAW-52000-212-3L 12" 3 Tubes Left 31.57" 19.05" 7/8" Threaded
SAW-52000-214-3L 14" 3 Tubes Left 35.57" 21.05" 7/8" Threaded
SAW-52000-216-3L 16" 3 Tubes Left 40.57" 24.05" 7/8" Threaded
SAW-52000-208-3R 8" 3 Tubes Right 22.9" 14.37" 7/8" Threaded
SAW-52000-210-3R 10" 3 Tubes Right 26.9" 16.37" 7/8" Threaded
SAW-52000-212-3R 12" 3 Tubes Right 31.57" 19.05" 7/8" Threaded
SAW-52000-214-3R 14" 3 Tubes Right 35.57" 21.05" 7/8" Threaded
SAW-52000-216-3R 16" 3 Tubes Right 40.57" 24.05" 7/8" Threaded

Select length,reservoir style, and side before check out.

more info
SWAY-A-WAY 2.5" piggy back Triple Bypass Shock
SWAY-A-WAY 2.5" piggy back Triple Bypass Shock
Our Price: $895.00

Sway-A-Way 2.5” Shocks are designed for applications including off-road buggies, long travel sand cars, trucks, pre runners, extreme rock crawlers, and performance street vehicles. These shocks can be rebuilt and re valved by the owner, and are available in remote reservoir, top mount piggyback, bottom mount piggy back, emulsion, air shock and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in left and right hand designs. Shock travel ranges from 8” to 18” in 2” increments
All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.
Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.

56000-0308-3L Bypass Shock 2.5x8 3-Tube Piggyback Reservoir Left
56000-0308-3R Bypass Shock 2.5x8 3-Tube Piggyback Reservoir Right
56000-0310-3L Bypass Shock 2.5x10 3-Tube Piggyback Reservoir Left
56000-0310-3R Bypass Shock 2.5x10 3-Tube Piggyback Reservoir Right
56000-0312-3L Bypass Shock 2.5x12 3-Tube Piggyback Reservoir Left
56000-0312-3R Bypass Shock 2.5x12 3-Tube Piggyback Reservoir Right
56000-0314-3L Bypass Shock 2.5x14 3-Tube Piggyback Reservoir Left
56000-0314-3R Bypass Shock 2.5x14 3-Tube Piggyback Reservoir Right
56000-0316-3L Bypass Shock 2.5x16 3-Tube Piggyback Reservoir Left
56000-0316-3R Bypass Shock 2.5x16 3-Tube Piggyback Reservoir Right
56000-0318-3L Bypass Shock 2.5x18 3-Tube Piggyback Reservoir Left
56000-0318-3R Bypass Shock 2.5x18 3-Tube Piggyback Reservoir Right



Select length and side before check out.

more info
   
 
It all started with a great idea and a little hard work. Today we're proud to provide quality products direct to your doorstep through an experience you'll enjoy. And most of all, we hope you'll enjoy the products as much as we do. Call or email us today to let us know what you think. We'd love to hear from you!