SHOP BY CATEGORY

PAYMENTS







Home > Shocks > SWAY-AWAY > BYPASS
Choose a category:
2.0" 2.5"
3.0" 4.0"
Sort By:
Page of 1
SWAY-A-WAY 2.0" Double Bypass Shock
SWAY-A-WAY 2.0" Double Bypass Shock
Our Price: $749.95

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!


2.0" Shocks
Sway-A-Way 2.0” Shocks are designed for applications including off-road buggies, long travel sand cars, extreme rock crawlers, trucks, pre runners and performance street vehicles. These rebuild able and re valve able shocks are available in remote reservoir, piggyback, emulsion, air shock and bypass designs.
Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in right and left hand designs. Shock travel ranges from 6” to 18” in 2” increments. All 2.0” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.0 air shocks come with a tubular 1 3/8” Nitro Steel shafts. All shock cylinders except the air, and bypass shocks are threaded for both single & dual rate applications, and use standard 2.5” I.D. coil springs.
Coil over kits can be added for coil spring applications. Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts.

Part # Travel (in) Tubes Side Extended
Length (in) Collapsed
Length (in) Shaft (in) Cylinder
Type
SAW-52000-208-2L 8" 2 Tubes Left 22.9" 14.37" 7/8" Threaded
SAW-52000-210-2L 10" 2 Tubes Left 26.9" 16.37" 7/8" Threaded
SAW-52000-212-2L 12" 2 Tubes Left 31.57" 19.05" 7/8" Threaded
SAW-52000-214-2L 14" 2 Tubes Left 35.57" 21.05" 7/8" Threaded
SAW-52000-216-2L 16" 2 Tubes Left 40.57" 24.05" 7/8" Threaded
SAW-52000-208-2R 8" 2 Tubes Right 22.9" 14.37" 7/8" Threaded
SAW-52000-210-2R 10" 2 Tubes Right 26.9" 16.37" 7/8" Threaded
SAW-52000-212-2R 12" 2 Tubes Right 31.57" 19.05" 7/8" Threaded
SAW-52000-214-2R 14" 2 Tubes Right 35.57" 21.05" 7/8" Threaded
SAW-52000-216-2R 16" 2 Tubes Right 40.57" 24.05" 7/8" Threaded

Select length,reservoir style, and side before check out.

more info
SWAY-A-WAY 2.0"  Triple Bypass Shock
SWAY-A-WAY 2.0" Triple Bypass Shock
Our Price: $779.95

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!
Discounted 10% off of MSRP

2.0" Shocks
Sway-A-Way 2.0” Shocks are designed for applications including off-road buggies, long travel sand cars, extreme rock crawlers, trucks, pre runners and performance street vehicles. These rebuild able and re valve able shocks are available in remote reservoir, piggyback, emulsion, air shock and bypass designs.
Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in right and left hand designs. Shock travel ranges from 6” to 18” in 2” increments. All 2.0” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.0 air shocks come with a tubular 1 3/8” Nitro Steel shafts. All shock cylinders except the air, and bypass shocks are threaded for both single & dual rate applications, and use standard 2.5” I.D. coil springs.
Coil over kits can be added for coil spring applications. Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts.

Part # Travel (in) Tubes Side ExtendedLength (in) CollapsedLength (in) Shaft (in) CylinderType
SAW-52000-208-3L 8" 3 Tubes Left 22.9" 14.37" 7/8" Threaded
SAW-52000-210-3L 10" 3 Tubes Left 26.9" 16.37" 7/8" Threaded
SAW-52000-212-3L 12" 3 Tubes Left 31.57" 19.05" 7/8" Threaded
SAW-52000-214-3L 14" 3 Tubes Left 35.57" 21.05" 7/8" Threaded
SAW-52000-216-3L 16" 3 Tubes Left 40.57" 24.05" 7/8" Threaded
SAW-52000-208-3R 8" 3 Tubes Right 22.9" 14.37" 7/8" Threaded
SAW-52000-210-3R 10" 3 Tubes Right 26.9" 16.37" 7/8" Threaded
SAW-52000-212-3R 12" 3 Tubes Right 31.57" 19.05" 7/8" Threaded
SAW-52000-214-3R 14" 3 Tubes Right 35.57" 21.05" 7/8" Threaded
SAW-52000-216-3R 16" 3 Tubes Right 40.57" 24.05" 7/8" Threaded

Select length,reservoir style, and side before check out.

more info
SWAY-A-WAY 2.5" piggy back Triple Bypass Shock
SWAY-A-WAY 2.5" piggy back Triple Bypass Shock
Our Price: $895.00

Sway-A-Way 2.5” Shocks are designed for applications including off-road buggies, long travel sand cars, trucks, pre runners, extreme rock crawlers, and performance street vehicles. These shocks can be rebuilt and re valved by the owner, and are available in remote reservoir, top mount piggyback, bottom mount piggy back, emulsion, air shock and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in left and right hand designs. Shock travel ranges from 8” to 18” in 2” increments
All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.
Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.

56000-0308-3L Bypass Shock 2.5x8 3-Tube Piggyback Reservoir Left
56000-0308-3R Bypass Shock 2.5x8 3-Tube Piggyback Reservoir Right
56000-0310-3L Bypass Shock 2.5x10 3-Tube Piggyback Reservoir Left
56000-0310-3R Bypass Shock 2.5x10 3-Tube Piggyback Reservoir Right
56000-0312-3L Bypass Shock 2.5x12 3-Tube Piggyback Reservoir Left
56000-0312-3R Bypass Shock 2.5x12 3-Tube Piggyback Reservoir Right
56000-0314-3L Bypass Shock 2.5x14 3-Tube Piggyback Reservoir Left
56000-0314-3R Bypass Shock 2.5x14 3-Tube Piggyback Reservoir Right
56000-0316-3L Bypass Shock 2.5x16 3-Tube Piggyback Reservoir Left
56000-0316-3R Bypass Shock 2.5x16 3-Tube Piggyback Reservoir Right
56000-0318-3L Bypass Shock 2.5x18 3-Tube Piggyback Reservoir Left
56000-0318-3R Bypass Shock 2.5x18 3-Tube Piggyback Reservoir Right



Select length and side before check out.

more info
SWAY-A-WAY 2.5"  Triple Bypass Shock
SWAY-A-WAY 2.5" Triple Bypass Shock
Our Price: $995.00

Sway-A-Way 2.5” Shocks are designed for applications including off-road buggies, long travel sand cars, trucks, pre runners, extreme rock crawlers, and performance street vehicles. These shocks can be rebuilt and re valved by the owner, and are available in remote reservoir, top mount piggyback, bottom mount piggy back, emulsion, air shock and bypass designs. Both the piggyback and the bypass designs feature a top that allows it to swivels 360 degrees for easy fitment. Bypass shocks are available in left and right hand designs. Shock travel ranges from 8” to 18” in 2” increments
All 2.5” shocks come standard with bright silver cadmium plated cylinders and high strength 7/8” Nitro Steel shafts that are chip and rust resistant. All 2.5 air shocks come with a tubular 1 5/8” Nitro Steel shafts. All shock cylinders except the air, bottom mount piggyback, and bypass shocks are threaded for both single & dual rate applications, and use standard 3” I.D. coil springs.
Shocks come standard with high strength Com 10 Teflon lined steel spherical bearings on each end with 304 stainless spacers. All aluminum parts are red anodized. Shocks with black anodized aluminum parts will be available in the spring of 2008. Standard nitrogen pressure is 200 PSI for all shocks except the air shocks. Spacers are 1.25 wide in the ends and use ½” bolts. Sway-A-Way’s 2.5” Smooth Body Bottom Mount Piggyback Shock utilize an innovative design which allows the shock body to swivel 360* for ease of installation. Taking the reservoir off the bottom of the cylinder provides that all of the oil must pass through the piston as it travels in the cylinder. This provides for more control and better performance.

56000-0208-3L Bypass Shock 2.5x8 3-Tube Remote Reservoir Left
56000-0208-3R Bypass Shock 2.5x8 3-Tube Remote Reservoir Right
56000-0210-3L Bypass Shock 2.5x10 3-Tube Remote Reservoir Left
56000-0210-3R Bypass Shock 2.5x10 3-Tube Remote Reservoir Right
56000-0212-3L Bypass Shock 2.5x12 3-Tube Remote Reservoir Left
56000-0212-3R Bypass Shock 2.5x12 3-Tube Remote Reservoir Right
56000-0214-3L Bypass Shock 2.5x14 3-Tube Remote Reservoir Left
56000-0214-3R Bypass Shock 2.5x14 3-Tube Remote Reservoir Right
56000-0216-3L Bypass Shock 2.5x16 3-Tube Remote Reservoir Left
56000-0216-3R Bypass Shock 2.5x16 3-Tube Remote Reservoir Right
56000-0218-3L Bypass Shock 2.5x18 3-Tube Remote Reservoir Left
56000-0218-3R Bypass Shock 2.5x18 3-Tube Remote Reservoir Right


Select length,reservoir style, and side before check out.

more info
SWAY-A-WAY 4.0" Bypass Shock
SWAY-A-WAY 4.0" Bypass Shock
Our Price: $2,395.00

FREE SHIPPING on entire order with the purchase of 2 or more swayaway shocks!
Discounted 10% off of MSRP

4.0" Six Tube Bypass Shocks
Hard core Sway-A-Way 4.0” Bypass Shocks are designed for the rear of Class 1 buggies and all around on off road racing trucks. These shocks are manufactured using an innovative design which allows the shock body to rotate 360 degrees for ease of installation and eliminates the need for left and right specific shocks. Remote reservoir and piggy back designs are available.
These shocks feature Com-14 Teflon lined steel spherical bearings, industries first 1 1/4” Nitro Steel shaft that will not chip or rust, and bright silver cadmium plated cylinders. Sway-A-Way 4.0” Bypass Shocks are custom built to order, which allows for specific placement of 4 compression tubes and 2 rebound tubes for position sensitive tuning and are ideal for Class 1, Class 8, Trophy Trucks & off-road buggies.

Part # Shock Travel Ext.Length Comp.Length Shaft Cylinder Type
SAW-59000-314-6 4.0" Dia. 14" 42.93" 28.93" 1 1/8" 6 Tube
SAW-59000-316-6 4.0" Dia. 16" 46.93" 30.93" 1 1/8" 6 Tube
SAW-59000-318-6 4.0" Dia. 18" 50.93" 32.93" 1 1/8" 6 Tube
SAW-59000-320-6 4.0" Dia. 20" 54.93" 34.93" 1 1/8" 6 Tube
SAW-59000-322-6 4.0" Dia. 22" 58.93" 36.93" 1 1/8" 6 Tube


Part # Shock Travel Ext.Length Comp.Length Shaft Cylinder Type Reservoir Type
SAW-59000-114-6 4.0" Dia. 14" 42.93" 28.93" 1 1/8" 6 Tube Remote Reservoir
SAW-59000-116-6 4.0" Dia. 16" 46.93" 30.93" 1 1/8" 6 Tube Remote Reservoir
SAW-59000-118-6 4.0" Dia. 18" 50.93" 32.93" 1 1/8" 6 Tube Remote Reservoir
SAW-59000-120-6 4.0" Dia. 20" 54.93" 34.93" 1 1/8" 6 Tube Remote Reservoir
SAW-59000-122-6 4.0" Dia. 22" 58.93" 36.93" 1 1/8" 6 Tube Remote Reservoir

Select length and side before check out.

more info
   
 
It all started with a great idea and a little hard work. Today we're proud to provide quality products direct to your doorstep through an experience you'll enjoy. And most of all, we hope you'll enjoy the products as much as we do. Call or email us today to let us know what you think. We'd love to hear from you!