|
|
|
|
|
|
Weld-In Drain Or Fill Plug
|
|
|
A universal weld-in drain or fill plug. This is a 2-piece bung that can be welded into anything you like.
It uses standard 3/4" NPT threads making it easily adaptable to common pipe fittings.
These are the same fittings found on our Diff-Covers.
The outside of the plug measures just over 1-1/4", An 1-3/8" hole is perfect for fitting in and having a solid weld.
The Hex wrench needed for the plug is 7/16".
The possibilities are endless:
Add a drain plug to any diff cover.
Add a fitting to an air tank.
Add a drain to a tubbed bed.
Supplied by Ruffstuf Specialties
|
|
|
|
|
|
|
|
|
|
PHENIX BILLET FILLER CAP WITH WELD-ON BUNG ALUMINUM
|
|
|
FILLER CAP ALUMINUM WITH WELD-IN ALUMINUM BUNG SMALL.
2" od of weld on bung
1.070" total height
1.853" od step filler cap
|
|
|
|
|
|
|
|
|
|
BILLET FILLER CAP WITH WELD-ON ALUMINUM BUNG 2.50 od 2 1/2
|
|
|
2.50 od weld bung aluminum for fuel tank, water tank or were ever you need a cap. Oring seal
1 3/8 overall height
2 3/4 overall width of cap
2 1/4 id
|
|
|
|
|
|
|
|
|
|
BILLET FILLER CAP WITH WELD-ON BUNG BLACK ALLSTAR ALL36167
|
|
|
FILLER CAP BLACK ALUMINUM WITH WELD-IN STEEL BUNG SMALL.
We use these for are ford 9" rear ends so we can fill and open and inspect gears works great.
2" od of weld on bung
1 1/2" id of bung
1 1/4" total height
2 1/2" od of filler cap
|
|
|
|
|
|
|
|
|
|
WELD ON FILLER WITH BUNG
|
|
|
The Weld Bung Filler Neck is Steel
The Screw Cap is Aluminum
Filler weld bung OD 1.95"
Filler weld bung step OD 1.85"
Filler weld bung height 0.56"
Filler weld bung ID 1.39"
Total Height with Cap 1.2"
Cap OD 2.375"
Non-Vented Screw Cap
O-Ring Included
|
|
|
|
|
|
|
|
|
|
PHENIX IND WELD BUNG WITH CAP ALUMINUM 1.94" OD 1.5"ID
|
|
|
PHENIX IND WELD BUNG WITH BLACK CAP 1.94" OD 1.5" ID ALUMINUM
NICE ORING SEAL AND SMOOTH THREADS
|
|
|
|
