|
|
|
|
|
1/2 TEAR DROP
|
|
You want to make your project look like the pro's use these tear drops on your shock mounts for extra thickness and bring you project to the next level. 1/2 id / 2 7/8 overal length SUPPLIED BY LATEST RAGE
|
|
|
|
|
|
|
|
1/2 WELD WASHER
|
|
Sold Each
Need to make a hole stronger with out make the whole plate here you go.
Many will use them with the "V" edge down when using a MIG for easy penetration, I like them flat when I TIG for a clean, tight presentation thats just as strong. These are 1020 mild steel but 7/32" thick so no need for Chromoly and if its not going to be heat treated why bother anyway.
1 1/4" in overall diameter and the apex of the bevel is 15/16".
|
|
|
|
|
|
|
|
9/16 WELD WASHER
|
|
Sold Each
Need to make a hole stronger with out make the whole plate here you go.
Many will use them with the "V" edge down when using a MIG for easy penetration, I like them flat when I TIG for a clean, tight presentation thats just as strong. These are 1020 mild steel but 7/32" thick so no need for Chromoly and if its not going to be heat treated why bother anyway.
1 1/4" in overall diameter and the apex of the bevel is 15/16".
|
|
|
|
|
|
|
|
5/8 WELD WASHER
|
|
Sold Each
Need to make a hole stronger with out make the whole plate here you go.
Many will use them with the "V" edge down when using a MIG for easy penetration, I like them flat when I TIG for a clean, tight presentation thats just as strong. These are 1020 mild steel but 7/32" thick so no need for Chromoly and if its not going to be heat treated why bother anyway.
1 1/4" in overall diameter and the apex of the bevel is 15/16".
|
|
|
|
|
|
|
|
3/4 WELD WASHER
|
|
Sold Each
Need to make a hole stronger with out make the whole plate here you go.
Many will use them with the "V" edge down when using a MIG for easy penetration, I like them flat when I TIG for a clean, tight presentation thats just as strong. These are 1020 mild steel but 7/32" thick so no need for Chromoly and if its not going to be heat treated why bother anyway.
1 1/4" in overall diameter and the apex of the bevel is 15/16".
|
|
|
|
|
|
|
|
1/2 THREADED WELD WASHERS EACH R1746
|
|
These are a little different in that they are not really meant to repair a hole. These are made to create a bolt on position for anything you need to bolt on.
Lets face it, its pretty hard to tap a .120 wall tube and having a bolt on position wherever you need makes these too easy. Every Fab Shop could use 100 a week if not more!
These come in 3 bolt sizes (5/16", 3/8", & 1/2" Fine Thread) . They fit into a 3/4" drilled hole so they are good for down to about 1 1/4" tube or any flat plate. This picture shows the 3 different sizes mounted in a 1 1/2" tube.
1" OD .75 OD STEP .25 STEP
SUPPLIED BY RUFFSTUFF SPECALTIES
|
|
|
|
|
|
|
|
1/2 WELD WASHERS EACH 1/4 STEP
|
|
These are a new version of our weld washers. These are designed to fix a mounting hole that has be ovaled out. They are designed with 1/4" depth, as in the OD will press down 1/4" into the drilled hole. The drill size for each washer is a 1/4" larger than the diameter of the fastener being used, so...
1/2" bolt, drill 3/4" hole
1.25" OD .75 OD STEP .25 STEP
SUPPLIED BY RUFFSTUFF SPECALTIES
|
|
|
|
|
|
|
|
5/8 WELD WASHER THICK 1/4 STEP
|
List Price: $3.00 Our Price: $3.50
|
|
|
5/8 INSIDE HOLE 1/4 STEP 7/8 OD OF REPAIR HOLE
SOLD EACH
|
|
|
|
|
|
|
|
5/8 RACE WELD WASHER 1/4 TALL SHOULDER
|
List Price: $5.99 Our Price: $4.99 Savings: $1.00
|
|
|
These weld washers are CNC machined from chromoly and are used to reinforce both the steel plate and bolt surface.
Specifications:
Material: USA Made Chromoly
Bolt Diameter: 5/8 Inch
Shoulder
SOLD EACH
Dimensions:
Bolt Hole: 5/8
Outside Diameter: 1-1/2 Inches
Height of Shoulder: 1/4 Inch
Diameter of Shoulder: 1 Inch
|
|
|
|
|
|
|
|
3/4 RACE WELD WASHER
|
List Price: $5.99 Our Price: $4.99 Savings: $1.00
|
|
|
These weld washers are CNC machined from chromoly and are used to reinforce both the steel plate and bolt surface.
Specifications:
Material: USA Made Chromoly
Bolt Diameter: 3/4 Inch
Shoulder: 1/4 inch SOLD EACH
|
|
|