LINK BRACKETS

SHOP BY CATEGORY

PAYMENTS

Home > Fabrication > Tabs/Brackets > LINK BRACKETS

Sort By:

Page of 1

Link Tab 1/4 Thick NO Hole- 3.25 Radius

Our Price: $4.85

Made to fit a 3.25" Tube so it is easily adjusted to fit larger or smaller in a couple of minutes.
250" (1/4) thick. Easy to put a bridge between 2 to create the 4 link bracket you want.
There is no bolt hole NOTE: SOLD INDIVIDUALLY

5/8 HOLE TRACTION BAR/TAB 3/16 THICK

Our Price: $5.75

SOLD EACH
TRACTION/4LINK BRACKET-5/8 HOLE-3/16 THICK
4 3/4 CENTER OF HOLE TO WELD SURFACE BOTTOM

3/4 HOLE TRACTION BAR/TAB 3/16 THICK

Our Price: $5.75

SOLD EACH
TRACTION/4LINK BRACKET-3/4 HOLE-1/4 THICK
4 3/4 CENTER OF HOLE TO WELD SURFACE BOTTOM

Link Tab 3/8 Thick 9/16 Hole 1.750 Radius

Link Tab 3/8 Thick 9/16 Hole 1.750 Radius

Our Price: $5.95

Made to fit a 1.75" Tube so it is easily adjusted to fit larger or smaller in a couple of minutes.
It, and all of our Link Single Tabs are a seriously strong .375" (3/8) thick. Easy to put a bridge between 2 to create the 4 link bracket you want.
These are meant to be interchanged with our other sizes to attain the angle desired. these are from the axle to the bolt centerline.
The bolt hole is drilled for .5625" (9/16) bolts but easily drilled to another size.
NOTE: SOLD INDIVIDUALLY
Supplied by Ruffstuff Specalties

3/4 HOLE TRACTION BAR/TAB 1/4 THICK

Our Price: $5.95

SOLD EACH
TRACTION/4LINK BRACKET-3/4 HOLE-1/4 THICK
4 3/4 CENTER OF HOLE TO WELD SURFACE BOTTOM

LOWER AXLE LINK BRACKETS 3.0 TUBE 2.625 WIDTH 9/16 BOLT HOLE

LOWER AXLE LINK BRACKETS 3.0 TUBE 2.625 WIDTH 9/16 BOLT HOLE

Our Price: $39.99

4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease of installation and allow for plenty of welding surface area. 1/4 " steel.

2.63" Mounting Width 9/16" hole.

LOWER LINK BRACKETS

Our Price: $49.95

These are the ideal way to set up the bottom link of any 3 or 4 link suspension and these are almost 3 pounds each! They are meant for the side or the rig taking a beating now and then (all the time). We make them .25 thick with a gradually sloped ramp shape to bring them up to the strength of our .375 Chassis tabs and lessen impact, we are pretty sure you can wear them out but you will be very challenged to break them. They are high enough around the bolt to give all but the very largest Heims complete protection and still short enough on the joint end to allow full articulation. These are in the popular 2.625 (2 5/8) width so any joint or Heim with missalignment can be used. Made exclusively of A50 Steel Plate for its density and strength. These are sold in pairs.

SUPPLIED BY RUFFSTUFF SPECIALTIES

ADJUSTABLE 3-LINK TOWER - 3.0 AXLE TUBES /2.63 WIDTH

ADJUSTABLE 3-LINK TOWER - 3.0 AXLE TUBES /2.63 WIDTH

Our Price: $49.99

Adjustable 3-Link Tower 7", 8", 9" Separations from center of axle tube.
3.0, Axle Tube Sizes. 2.625 Mounting Width with 9/16" Hole

CNC cut from 1/4" mild steel and CNC bent on 5-axis Trumpf Press Brake. Comes unassembeled and will require welding. Designed with relief cuts to not trap mud and debris in the bracket promoting rust. Bracket can be ground to fit for angular offsets.

What's Included One (1) Unwelded Bracket

3 LEG LINK BRACKET 25 DEGREES

Our Price: $55.00

3 legged links these new ones are .25" thick but retain the 3/8" inner tab for an extremely strong backbone.

They are sold in pairs and come unwelded. They are easily customized to fit all kinds of applications.

Lower Triangulated 4 Link Bracket

List Price: $85.99

Our Price: $68.78

Savings: $17.21

Made from 1/4" material
Fit 1 3/4" tube but can easily fit 2" with some grinding
2 5/8 (2.63) Width mounting width for rod ends
9/16" bolt hole but can be drilled out for larger
Sold Unwelded