|
|
|
|
|
|
Smittybilt Winch Pull Strap Hook Grab Handle
|
|
|
Part Number: S/B769402
Made of nylon and rubber
Sold individually
Get added leverage when unspooling your winch's steel cable. Grab Handle has an extreme molded handle and ballistic nylon webbing for added strength with versatile universal applications.
|
|
|
|
|
|
|
|
|
|
XRC Logo Winch Cover
|
|
|
Part Number: S/B97281-99
Fits 8000 lb to 12000 lb winch
Black canvas
Dimensions: 6 inches wide x 10 inches tall x 22 inches long
Protect your winch investment from the elements and show your
Smittybilt pride with this XRC8 & XRC10 logo winch cover from Smittybilt
|
|
|
|
|
|
|
|
|
|
Roller Fairlead Mounted License Plate Bracket
|
|
|
Part Number: S/B4432
For 4 way roller fairlead
No drilling installation
If you have a winch and fairlead mounted to the front of your vehicle, there’s nowhere to put your license plate.
With Smittybilt’s license plate holder you just mount you license plate to the holder and snap it on your roller fairlead, and once again your street legal.
|
|
|
|
|
|
|
|
|
|
Smittybilt Aluminum Hawse Fairlead 2809
|
|
|
Part Number: S/B2809
For Synthetic ropes
10” on center bolt pattern
Mounts on 6,000-12,000 lb winches
Works with synthetic winch ropes 6,000-12,000 lb. winches with 10” on center mounting holes.
|
|
|
|
|
|
|
|
|
|
Low Profile Winch Roller Fairlead Jeep Truck 4x4 Smittybilt 2810
|
|
|
Part Number: R/ERE1025
Universal design
Constructed of billet aluminum
Low-profile and lightweight
Stealth black anodized finish
Keep your Synthetic Winch Rope safe with this stylish Rubicon Express Billet Fairlead.
|
|
|
|
|
|
|
|
|
|
Smittybilt 2820 Winch Shackle Black
|
|
|
Smittybilt is proud to announce the availability of their new Aluminum Winch Shackle (A.W.S.).
The new A.W.S. provides a safer and stronger winch point than standard winch hooks and has a whopping 17,000 lb load rating.
A.W.S. Features:
• Easy install or removal
• Works with 3/4″ and 7/8″ D-Rings
• Precision machined from lightweight billet aircraft grade 6061 T-6 aluminum
• Max load rating of 17,000 lbs
• Fits synthetic ropes and wire cables up to 1/2″ in diameter
• Works with both roller and aluminum fairleads
• Durable and rugged black aluminum anodized finish
• Part Number: 2820
SIMILAR TO FACTOR 55
|
|
|
|
|
|
|
|
|
|
HITCHLINK
|
|
|
Part Number: F5500020
Precision CNC machined 6000 series aluminum
Weighs only 1/3 of conventional steel designs
Rated at 9500 pounds
Ultimate failure at 51,000 pounds
Fits standard 2 inch receivers
Fits standard 3/4 inch screw pin shackles
Anodized and powder coated for oxidation protection
Made in USA
The HitchLink, manufactured from solid 6061-T6 aluminum,
turns your tow hitch into a convenient and strong D-ring mount.
* * NOTE: Never exceed factory receiver hitch pull rating.
Always use a quality steel alloy 5/8” hitch pin. Always pull in line with the hitch, do not bind or side load the shackle.
|
|
|
|
|
|
|
|
|
|
ProLink Loaded
|
|
|
Part Number: F5500015
Red
Titanium pin and rubber guard
Fits all steel cables and synthetic ropes up to 3/8" in diameter
Max load rating of 16,000 pounds
Screw pin shackles are up to 5X stronger than conventional winch hooks
Recover straps cannot slip out of a shackle like they can with hooks
Billet construction - precision machined from 6061-T6 Kaiser Aluminum round bar
Can be installed and removed in minutes - simple snap ring removal
Cinches neatly against all types of fairleads -
Hawse or Roller
Anodized and zinc plated
Made in the USA
Replace conventional winch hooks with the new safer, stronger, and smarter Factor 55 ProLink shackle mount.
Factor 55 introduces the new
ProLink shackle mount for winch cables and synthetic ropes.
Engineered and machined in the USA from lightweight billet 6061 aluminum, the
ProLink provides a safe means to easily attach a standard 3/4" screw pin shackle to existing winch cable and rope eyes
The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8" double shear pin.
The front of the ProLink provides the precision shackle mounting hole and massive 1.2" thick mounting tab.
The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.
|
|
|
|
