|
|
|
|
|
|
CHASSIS TAB 3/16" STEEL 9/16 HOLE
|
|
|
3/16" Steel 9/16" Hole 3.5" over all height 2.5" from center of hole to bottom of part. 3" across bottom of part
SOLD EACH
|
|
|
|
|
|
|
|
|
|
FLAT SHORT LINK TAB CHASSIS TAB 3/8" STEEL 9/16 HOLE
|
|
|
3/8" Steel 9/16" Hole 3.25" overall height 2 1/8" from center of hole to bottom of part. 2 3/4" across bottom of part
SOLD EACH
SUPPLIED BY RUFFSTUFF SPECALTIES
|
|
|
|
|
|
|
|
|
|
FLAT MEDIUM LINK TAB CHASSIS TAB 3/8" STEEL 9/16 HOLE
|
|
|
3/8" Steel 9/16" Hole 3 3/4" overall height 2 5/8" from center of hole to bottom of part. 2 3/4" across bottom of part
SOLD EACH
SUPPLIED BY RUFFSTUFF SPECALTIES
|
|
|
|
|
|
|
|
|
|
FLAT LARGE LINK TAB CHASSIS TAB 3/8" STEEL 9/16 HOLE
|
|
|
3/8" Steel 9/16" Hole 4 1/4" overall height 3 1/8" from center of hole to bottom of part. 2 3/4" across bottom of part
SOLD EACH
SUPPLIED BY RUFFSTUFF SPECALTIES
|
|
|
|
|
|
|
|
|
|
Link Tab 3/8 Thick 9/16 Hole 1.750 Radius
|
|
|
- Made to fit a 1.75" Tube so it is easily adjusted to fit larger or smaller in a couple of minutes.
- It, and all of our Link Single Tabs are a seriously strong .375" (3/8) thick.
Easy to put a bridge between 2 to create the 4 link bracket you want.
- These are meant to be interchanged with our other sizes to attain the angle desired. these are from the axle to the bolt centerline.
- The bolt hole is drilled for .5625" (9/16) bolts but easily drilled to another size.
- NOTE: SOLD INDIVIDUALLY
- Supplied by Ruffstuff Specalties
|
|
|
|
|
|
|
|
|
|
LOWER AXLE LINK BRACKETS 3.0 TUBE 2.625 WIDTH 9/16 BOLT HOLE
|
|
|
4 link or 3 link lower link axle mount kits: Includes 2 link bracket kits to complete one axle. Plates 'self-jig' and are designed for ease of installation and allow for plenty of welding surface area. 1/4 " steel.
2.63" Mounting Width 9/16" hole.
|
|
|
|
|
|
|
|
|
|
ADJUSTABLE 3-LINK TOWER - 3.0 AXLE TUBES /2.63 WIDTH
|
|
|
Adjustable 3-Link Tower
7", 8", 9" Separations from center of axle tube.
3.0, Axle Tube Sizes. 2.625 Mounting Width with 9/16" Hole
CNC cut from 1/4" mild steel and CNC bent on 5-axis Trumpf Press Brake. Comes unassembeled and will require welding. Designed with relief cuts to not trap mud and debris in the bracket promoting rust. Bracket can be ground to fit for angular offsets.
What's Included
One (1) Unwelded Bracket
|
|
|
|
