SHOP BY CATEGORY

PAYMENTS







Home > Brake System > FORD 9" REAR BRAKE KIT
Sort By:
Page of 1
SSBC 1050-1 - SSBC BRAKE PADS FOR 9" CONVERSION
SSBC 1050-1 - SSBC BRAKE PADS FOR 9" CONVERSION
Our Price: $40.00

THESE ARE THE PADS THAT COME IN FORD 9" CONVERSION KIT IF YOU NEED REPLACMENTS HERE IS A HIGH QUALITY PAD NOT FROM THE AUTO PARTS STORE.

Brand:SSBC Manufacturer's
Part Number: 1050-1
Part Type:Brake Pads Product Line:SSBC Original Equipment Replacement Brake Pads
For Use with Stock Calipers: Yes
For Use with Stock Rotors: Yes
For Use with Slotted Rotors: Yes
For Use with Cross-Drilled Rotors: Yes
FMSI Reference Number: D52/D122/D313
Intended for Street Use: Yes
Brake Pad Material: Semi-metallic
Brake Pad Construction: Integrally molded with shims
Electronic Wear Sensor: No
Hardware Included: Yes
Quantity: Sold as a kit.
more info
Ford 9'" Weld On Disc Brake Brackets 3.250 TUBES
Ford 9'" Weld On Disc Brake Brackets 3.250 TUBES
Our Price: $50.00

SOLD AS A PAIR

These are made for the '89 11.75" Bronco 5 on 5.5" rotors and an inexpensive '73-87 Chevy 3/4 ton 4x4 front caliper. You can use any of the 20 or so high performance calipers that share the 7.05" caliper pin spacing also but the Chevy seems more than good enough for nearly everyone.

These are 3/8" thick and wrap completely around the axle. If the were only partially around the axle they would be strong enough but welding the entire diameter helps control warp of the tube itself. These are made for Full Floating Spindle end axles but will work with the factory flanged axle ends, just turn the flange down and cut off the bottom half of the circle.
We can help get you calipers and rotors at a great price!!!

SUPPLIED BY RUFFSTUFF SPECIALTIES

more info
Ford 9'" Weld On Disc Brake Brackets 3.500 TUBES
Ford 9'" Weld On Disc Brake Brackets 3.500 TUBES
Our Price: $50.00

SOLD AS A PAIR

These are made for the '89 11.75" Bronco 5 on 5.5" rotors and an inexpensive '73-87 Chevy 3/4 ton 4x4 front caliper. You can use any of the 20 or so high performance calipers that share the 7.05" caliper pin spacing also but the Chevy seems more than good enough for nearly everyone.

These are 3/8" thick and wrap completely around the axle. If the were only partially around the axle they would be strong enough but welding the entire diameter helps control warp of the tube itself. These are made for Full Floating Spindle end axles but will work with the factory flanged axle ends, just turn the flange down and cut off the bottom half of the circle.
We can help get you calipers and rotors at a great price!!!

SUPPLIED BY RUFFSTUFF SPECIALTIES

more info
Rotor 5 x5.5 11.75" outside
Rotor 5 x5.5 11.75" outside
Our Price: $55.00

REPLACMENT ROTOR FOR FORD 9" BRAKE KIT. EACH

more info
Ford 9'" Weld On Disc Brake Brackets 3.00 TUBE SIZE
Ford 9'" Weld On Disc Brake Brackets 3.00 TUBE SIZE
Our Price: $55.95

SOLD AS A PAIR
These are made for the '89 11.75" Bronco 5 on 5.5" rotors and an inexpensive '73-87 Chevy 3/4 ton 4x4 front caliper. You can use any of the 20 or so high performance calipers that share the 7.05" caliper pin spacing also but the Chevy seems more than good enough for nearly everyone.

These are 3/8" thick and wrap completely around the axle. If the were only partially around the axle they would be strong enough but welding the entire diameter helps control warp of the tube itself. These are made for Full Floating Spindle end axles but will work with the factory flanged axle ends, just turn the flange down and cut off the bottom half of the circle.
We can help get you calipers and rotors at a great price!!!
more info
BRAKE CALIPERS 7.05 MOUNT SPREAD
BRAKE CALIPERS 7.05 MOUNT SPREAD
Our Price: $62.50

LOADED BRAKE CALIPERS USED IN ARE FORD 9" BRAKE KIT. EACH
CALIPER
SEMI METALLIC PAD
NO CORE

141-66005
141-66006

more info
FORD 9" REAR DISK BRAKE KIT
FORD 9" REAR DISK BRAKE KIT
Our Price: $349.99

You asked for it you got it Complete Ford 9" lowbuck disc brake kit.
  • QTY 2 RAYBESTOS CALIPERS
  • SSBC SEMI METALLIC BRAKE PADS
  • QTY 2 5 5.5 ROTOR'S
  • QTY 2 3/8 THICK WELD ON CALIPER BRACKETS
  • QTY 2 BANJO BOLTS WITH CRUSH WASHERS
more info
   
 
It all started with a great idea and a little hard work. Today we're proud to provide quality products direct to your doorstep through an experience you'll enjoy. And most of all, we hope you'll enjoy the products as much as we do. Call or email us today to let us know what you think. We'd love to hear from you!