|
|
|
|
|
U-BOLT 5/8" X 3" X 10" (EACH)( HEAVY DUTY) u-bolts
|
|
U-bolt made for 3" diameter axles, the exceptions are that they are .625" (5/8) Rolled Threads for extra strength and the threading is 5" long so they will fit! Cut off what you don't need after they are on, and they are also Grade 8. If they fit use them (if they don't fit drill your plates until they do)! All of our U-bolt plates are recomended to use 5/8" U bolts. Comes with Tallnuts and Thick cut 1/4" Washers. U-Bolts are Sold individually. SUPPLIED BY RUFFSTUFF SPECIALTIES
|
|
|
|
|
|
|
|
U-BOLT 5/8" X 3.50" X 10" (EACH)( HEAVY DUTY) u-bolts
|
|
U-bolt made for 3.50" diameter axles, the exceptions are that they are .625" (5/8) Rolled Threads for extra strength and the threading is 5" long so they will fit! Cut off what you don't need after they are on, and they are also Grade 8. If they fit use them (if they don't fit drill your plates until they do)! All of our U-bolt plates are recomended to use 5/8" U bolts. Comes with Tallnuts and Thick cut 1/4" Washers. U-Bolts are Sold individually. SUPPLIED BY RUFFSTUFF SPECIALTIES
|
|
|
|
|
|
|
|
U-BOLT 5/8" X 3.50" X 14.50" (EACH) u-bolts
|
|
U-BOLTS 5/8 DIAMETER, 14.50" LONG, 3.550" ID
THREAD STARTS AT 9 1/2" DOWN / 4 1/2" OF THREAD
|
|
|
|
|
|
|
|
U-BOLT 5/8" X 3.25" X 10" (EACH)( HEAVY DUTY) u-bolts
|
|
U-bolt made for 3.25" diameter axles, the exceptions are that they are .625" (5/8) Rolled Threads for extra strength and the threading is 5" long so they will fit! Cut off what you don't need after they are on, and they are also Grade 8. If they fit use them (if they don't fit drill your plates until they do)! All of our U-bolt plates are recomended to use 5/8" U bolts. Comes with Tallnuts and Thick cut 1/4" Washers. U-Bolts are Sold individually. SUPPLIED BY RUFFSTUFF SPECIALTIES
|
|
|
|
|
|
|
|
U-BOLT 1/2" X 2.75" X 9" (QTY 4)
|
|
Part Number: R/ERE1220
Fits 1984 to 2001 Jeep XJ Cherokee with Dana 44 or Dana 35 rear axle
2.75" x 9"
Includes 4 u-bolts and nuts
Set of four u-bolts and nuts for Cherokee. 1/2" diameter rod x 2.75" I.D x 9.0" length. Fits most Cherokees with Dana 44 and Model 35 rear diffs.
|
|
|