|
|
|
|
|
|
RUGGED RADIOS BLOWER CAP PUMPER
|
|
|
The Pumper Cap allows you to close off individual air outlets on your pumper system. This allows you to use a 2 person pumper with a single helmet, or a 4 person pumper with 1-3 helmets.
Works for all MAC series and Parker Pumper blowers.
|
|
|
|
|
|
|
|
|
|
BALDWIN FILTER SMALL NO TOP PA675
|
|
|
REPLACE YOUR PUMPER FILTER EVERY RACE TO KEEP YOUR SYSTEM WORKING AT 100%
FITS NEXGEN PUMPER/PARKER PUMPER
4-1/4" Dia. x 3-5/16" TALL
|
|
|
|
|
|
|
|
|
|
Parker Pumper Short Air Filter for Pumpers w/ Wing Nut
|
|
|
Pumper replacement element should be replaced after every race. Keep a couple for dusty or longer races. 5" Dia. x 3" Tall
CACTUS,PCI,BDR
|
|
|
|
|
|
|
|
|
|
Parker Pumper TALL Air Filter for Pumpers w/ Wing Nut
|
|
|
5" DIA X 5 1/2 TALL
BDR FILTER
|
|
|
|
|
|
|
|
|
|
RUGGED RADIOS Pre-filter for MAC1 & MAC3.2 Pumper System
|
|
|
Pre-Filters are highly recommended for applications that are used in extremely rugged environments. Rugged Pre-Filters are manufactured from a durable water resistant polyester material. With uniform micro openings that filter out debris 5 microns and larger.
Fits the MAC1 & MAC3.2 air pumper filter.
|
|
|
|
|
|
|
|
|
|
5FT Race Air Hoses for Pumpers
|
|
|
5 FT PCI RACE AIR HOSES PARKER PUMPER HOSE
|
|
|
|
|
|
|
|
|
|
PCI RACE AIR REPLACEMENT FILTER
|
|
|
Replacement Filter Element
You change your oil filter and your intake filter, you also need to change your Race Air Filter!
The Race Air replacement filter stops dirt and fine dust while allowing a consistent airflow of clean fresh air. Your race air filter is an often overlooked, essential component to your racing program. Make sure to have clean fresh air throughout your race with our washable replacement filter.
To clean your filter use an air compressor to blow out the dirt and dust from the inside -> outside. Rinse with warm water again keeping the flow going from the inside -> outside of the filter element. Shake off excess water and let it dry thoroughly before reinstalling. We recommend cleaning the filter after every dirt outing and replacing the filter every season.
*Always use your Race Air filters with the Race Air Aluminum Bonnet
Wash and thoroughly dry after each use
Change the filter every season
Easy to change filter with top wing nut
It is a good idea to keep a spare filter ready to use
|
|
|
|
|
|
|
|
|
|
PCI 4FT Race Air Hoses for Pumpers HOSE-4
|
|
|
4 FT PARKER PUMPER HOSE
|
|
|
|
|
|
|
|
|
|
MAC 2-6 FT EXPANDABLE PUMPER HOSE RUGGED RADIOS
|
|
|
MAC-X (2-6ft.) Expandable Pumper Hose with Cuffs
Super lightweight (1/2 lb) and expandable pumper hose.
Capable of stretching between 2-6ft and manually collapses back to its original shape when not in use. Enhanced flexibility allows multiple point adjustments between blower system and helmet.
Durable cufflink ends stay tightly connected to helmet and pumper system, ensuring that the hose wont fall off even in the harshest of racing environments.
Designed for the MAC Pumper series, but also compatible with Parker Pumper and other popular models.
|
|
|
|
|
|
|
|
|
|
RUGGED RADIOS 1.5 CLAMP FOR PUMPER/RACE RADIO
|
|
|
Billet machined bar mounts make it easy to mount intercoms, headset hangers and other accessories to 1", 1.25", 1.5", 1.75" 1.8" and 2" tubing. Offered in four sizes to adapt to virtually all UTV's, sand rails, and custom builds!
Made in the U.S.A. right here in San Luis Obispo, CA!
Half-Clamp Design
Stainless Steel Hardware
CNC machined alloy
Black anodized finish
Sold individually, not in sets.
|
|
|
|
