|
|
|
|
|
|
Rack Mount Pre-Welded*** DISCONTINUED***
|
|
|
Rack mount has pre-welded tabs to rest on the top beam for zero bump steer on a 6" over beam with our 2 1/4 longer arms.
Place on the center of the upper beam and rotate back about 21 degrees. Tack weld to the beam and check for bump steer. If bump steer still exist cut welds and re-rotate a degree or two and check for zero bump steer.
Welds to 2 " diameter beam
Designed for center load racks
or any rack with a 1 x 6 inch bolt pattern
|
|
|
|
|
|
|
|
|
|
Towerless Beam Kit
|
|
|
Towerless beam kit.
To build towerless beams using hoops
for shock supports
Beam towerless kit
2 end plates,
2 hoop brackets $29.95
Specifications:
With weld on gusset for your removable shock hoops.
|
|
|
|
|
|
|
|
|
|
AS-C Beam NO TOWERS
|
|
|
Our 6 inch wider beams with NO towers are able to be used with coil-over or non-coil-over shocks.
AS-CNO Beam For Coil-over shocks From $215.00
Chromolly beams - Add $90.00
Rack mount welded in place for zero bump steer -
Add $20.95
Specifications:
Coil- over beams do not have torsion adjusters
Can be custom made to any width.
AC401009NT
Do not purchase from Website we need to discuss options and freight Options
|
|
|
|
|
|
|
|
|
|
AS-C Beam 10" TOWERS
|
|
|
Our 6 inch wider beams with 10 inch towers are able to be used with coil-over or non-coil-over shocks.
AS-C Beam For Coil-over shocks From $265.00
Chromolly beams - Add $90.00
Rack mount welded in place for zero bump steer -
Add $20.95
Specifications:
Coil- over beams do not have torsion adjusters
Can be custom made to any width.
AC401009MS
Do not purchase from Website we need to discuss options and freight Options
|
|
|
|
