|
|
|
|
|
Dana 44 Spindle Nut Kit 4 Slot Spicer 28068X GM Ford Jeep International Dodge
|
|
Part Number: D/S28068X
Dana 30/44/GM 10 Bolt Spindle Nut Kit
Includes Outer Nut Without Pin
Locking Ring
Inner Nut With Pin
Services One Side Only
Looking for a single spindle nut of a complete set Dana Spicer has spindle nuts for most popular applications.
|
|
|
|
|
|
|
|
DANA 44 PINION YOKE JEEP RUBICON 03-06 HIGH ANGLE
|
|
This 1330 pinion yoke fits the Dana 44 differential found in the 2003-2006 Jeep Rubicon. Its a factory 1330 direct replacement.
It takes the Dana strap kit 2-70-18X.
Spline Count: 26
Spline Diameter: 1.146
Hub Diameter: 1.552
Thru Hole: 1.500
Centerline To End: 3.732
Ujoint: 1330
Notes: Strap type / 03-06 Jeep Rubicon
|
|
|
|
|
|
|
|
G2 DANA 44 TIMKEN BEARING MASTER INSTALL KIT 35-2033
|
|
60-80 CHEVROLET K10/25 FRONT
69-01 DODGE W100/150/200/300
71-77 FORD BRONCO FRONT
65-77 FORD F100/150/250 FRONT
72-81 IHC SCOUT FRONT
68-81 IHC SCOUT REAR
74-83 JEEP WAGONEER FRONT
74-86 JEEP J10/10 FRONT
55-75 JEEP CJ5 (OPTIONAL)
1986 JEEP CJ7 REAR
86-92 JEEP XJ REAR (OPTIONAL)
84-92 JEEP GRAND WAGONEER FRONT
72-79 JEEP WAGONEER REAR
97-02 JEEP TJ REAR (OPTIONAL)
NOTE DOES NOT FIT:JEEP RUBICON D44 03-06 / D44 ALUMINUM HOUSING (JEEP) / 94-96 FORD BRONCO /94-01 DODGE
Part Number: G/235-2033
Pinion Nut
Pinion Seal
Timken Outer Pinion Bearing And Race
Crush Sleeve
Timken Inner Pinion Bearing And Race
Pinion Shims
Carrier Shims
Carrier Bearings And Races
Ring Gear Bolts
Thread Locking Compound
Gear Marking Compound
Silicone Sealer
G2 Master kits include all the parts that are needed to properly install a ring and pinion. These G2 kits include hard to find parts like a proper shim kit, replacement pinion nut , crush sleeve, pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, locktite and gear marking compound. these are the parts that the auto parts store never seems to have or ever herd of.
|
|
|
|
|
|
|
|
DANA 44 BALLJOINT TTB KIT UPPER/LOWERS
|
|
MOOG HD REPLACEMENT BALL JOINTS UPPER AND LOWERS FOR YOUR FORD BRONCO TTB
REPLACE YOUR WORN OUT BALL JOINTS WITH THESE NEW HIGH QUALITY JOINTS.
K80026 K8195T
|
|
|
|
|
|
|
|
G2 DANA 44 STANDARD ROTATION 5.13 RING AND PINION 2-2033-513
|
|
60-80 CHEVROLET K10/25 FRONT 69-01 DODGE W100/150/200/300
71-77 FORD BRONCO FRONT
65-77 FORD F100/150/250 FRONT
72-81 IHC SCOUT FRONT
68-81 IHC SCOUT REAR
74-83 JEEP WAGONEER FRONT
74-86 JEEP J10/10 FRONT
55-75 JEEP CJ5 (OPTIONAL)
1986 JEEP CJ7 REAR
86-92 JEEP XJ REAR (OPTIONAL)
84-92 JEEP GRAND WAGONEER FRONT
72-79 JEEP WAGONEER REAR
97-02 JEEP TJ REAR (OPTIONAL)
Standard Rotation-Note some vech take thick gears to make up for thickness prt #2-2033-513x
If you are not sure these will fit message us and we will confirm your make and model.
|
|
|